5000CD Turbo (Canada) L5-2144cc 2.14L SOHC Turbo (KH) (1984)
QUICK CHECK OF DISTRIBUTOR VACUUM ADVANCE/RETARD
-
pull off vacuum retard hose from distributor connection
-
engine speed must increase
-
reattach retard hose
-
increase engine speed to 3,000 rpm
-
pull off vacuum advance hose from distributor connection
-
engine speed must decrease
-
reattach advance hose
-
check idle speed
-
specification: 925 ± 75 RPM
-
adjust if necessary
-
check timing and adjust if necessary by turning distributor. Leave vacuum hoses connected to distributor
-
checking: 3° ± 2° ATDC
-
adjusting: 3° ± 1° ATDC
-
re-adjust idle speed if necessary
-
pull breather hoses off valve cover and plug hoses (1982/83 models)
-
remove cap from "T" piece on hose to charcoal canister (1982/83 models)
-
check CO (at tailpipe)
ALL EXCEPT 1982/83 MANUAL TRANS.
-
checking: 0.9% maximum
-
adjusting: 0.5% + 0.40/c
1982/83 MANUAL TRANS.
-
checking: 1.5% maximum
-
adjusting: 1.0% + 0.5%
-
remove plug and insert P377 (arrow) to adjust if necessary
^
turn screw clockwise to raise % CO
^
turn screw counterclockwise to lower % CO
NOTE: While checking and adjusting, radiator fan must not be running
CAUTION: When adjusting CO, do not push adjustment wrench down. Do not accelerate engine with tool in place. Remove tool after each
adjustment and accelerate engine briefly before reading % CO
-
re-adjust idle speed if necessary
-
turn ignition OFF
-
remove CO meter
-
disconnect test wires from engine
-
reinstall CO plug and crankcase ventilation hoses