5000CS Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1988)
Note
Follow the manufacturer's instructions for correct setup and operating procedures.
After rotors are trued proceed to caliper and wheel installation, page 5
When new brake rotors are required:
^
thoroughly clean contact surfaces of brake rotor and hub
^
install using all lug bolts with suitable spacers (e.g. axle nuts)
^
tighten lug bolts diagonally in stages to 40 N-m (29 ft.lb.)
^
attach dial indicator to measure brake rotor runout
^
locate dial indicator approximately 10 mm (3/8 in.) from outer edge of rotor