5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
-
prime outside of glass in area shown
^
approx. 10 mm (25/64 in.) in width
-
coat primed area with paint primer from Adhesive kit D 004 300 03
-
allow to air dry at least 10 minutes
-
apply thin coat of adhesive sealer D 009 100 03 on back of C-pillar trim (as shown)
-
pull off foil from rivet holes on C-pillar trim cover
-
push C-pillar trim on to glass (as shown) in direction of arrow
^
ensure glass fits fully into clip
-
install three rivets at C-pillar trim