5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
-
turn adjusting screw (E) until sunroof cover is 2.0 mm below sunroof opening
Note: Adjustment screws must be threaded at least three turns into support.
-
tighten screw (B) until sunroof cover is level with roof cutout
-
tighten screw (A) until sunroof cover is 1.0 mm below roof cutout
-
tighten nut (D)
^ 5.0 Nm
-
adjust rear height of sunroof lid
Height adju8tment, rear
-
loosen guide plate mounting screws (arrows)
-
lift sunroof until it is 1.0 mm above sunroof cutout
-
tighten screws (arrows)
-
adjust water drain tray sealing gap
Water drain tray sealing gap, adjusting