5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
Hydraulic Brake Servo: All Technical Service Bulletins
Hydraulic Brake Servo - New Installation Procedures
Group: 47
Number: 92-02
Date: November 30, 1992
Subject:
New hydraulic brake servo-proper installation to avoid leakage
Model(s) and M.Y.'s:
5000/5000T 1984-1988
100/1000, 200/2000 1989-1991
Servo, identifying
Note
For all future repairs, the hydraulic brake servo used previously has been superseded by a new servo. The new brake servo has a different positioning of
the pressure and return lines, as noted in the chart. These hydraulic lines MUST be connected in their proper locations, or damage and leakage will
result.
Note
Brake servo units are paired with either long or short-version master cylinders. See chart which follows these illustrations, for vehicle application.
Original brake servo with LONG-version master cylinder