5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
--
Turn carbon blaster knob to "Blast" position.
--
Move and rotate blasting/cleaning nozzle by hand to reach all areas of the intake valve and port for one (1) minute.
--
Turn carbon blaster knob to "Clean" position, clean for one (1) minute.
--
Remove cover plate with cleaning nozzle.
--
Inspect intake valve with mirror and flashlight.
--
Blow out any remaining particles.
--
Remove return hose and adapter.
--
To clean cylinder #2, 4, 5, and 3 (in firing order) turn engine by hand to set cylinder to TDC.
--
Repeat cleaning procedure as described for cylinder #1.
--
After cleaning of all valves is completed use compressed air to clean all intake ports.
--
Reassemble engine by using the following new parts:
1984 (naturally aspirated and turbo charged engines)
Quantity
Description
Part Number
1 or 5 (if necessary)
Insert
063 133 555A
1 or 5
Insert sealing washer
N013 844.3
2 or 5
Injecter O-ring
063 133 557
1 (if required)
Gasket (intake)
035 129 717F
1 (if required)
Gasket (cold start valve)
063 906 179
Loctite 325
Locally Available
5
Tie wrap
N900 603.01
1 (if required)
Plug
049 133 777B
1985-87 (naturally aspirated and turbo charged engines)
Quantity
Description
Part Number
1 or 5 (if necessary)
Insert
035 133 554
1 or 5 (if necessary)
Insert
035 133 555C
1 or 5
Insert sealing washer
035 133 557