5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
Power Steering Line/Hose: All Technical Service Bulletins
Hydraulic Pump Banjo Bolt - Replacement
Applies TO:
5000 m.y. 1984-1988
Subject:
Hydraulic pump banjo bolt replacement
Number:
Group:
89-03
November 30, 1989
48
Brakes ^ Steering
Whenever the hydraulic pump is replaced the suction inlet line banjo bolt (arrow) must also be replaced.
All hydraulic pumps must be matched with a banjo bolt Part Number from the chart below. Previously, the chart was used only for pumps with a silver
tag.
Cods No. on
Use
Identification
pump tag (arrow)
Part No.
on head of bolt
1
N 021 072.2
none
2
N 902 670.01
1 groove
3
N 902 669.01
2 grooves
no number
N 902 670.01
1 groove
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest information.