5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
-
insert 0.1 mm (0.004 in.) feeler gauge between throttle valve stop and adjusting screw
-
loosen throttle switch assembly mounting screws
-
turn throttle switch assembly clockwise (arrow A) as tar as possible, then slowly turn counterclock wise (arrow B) until multimeter indicates zero
ohms (continuity)
-
tighten mounting screws
-
repeat measurement
IF NOT OK
-
replace idle switch and adjust as described
IF OK
-
check full throttle switch
FULL THROTTLE SWITCH, CHECKING
NOTE: The full throttle switch cannot be adjusted. It is correctly adjusted automatically when the idle switch is properly adjusted.
-
connect multimeter US 1119 between terminals 2 and 3 of throttle switch
^
specification: infinite ohms