5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
-
switch ON ignition
-
pull slide 2 of adjusting device into the 1st detent (idle position)
^
specification: 0.2 to 0.5 volts
If specification NOT obtained:
-
loosen mounting bolts on potentiometer
-
move sensor, in slot until the specification is obtained
-
retighten mounting bolts
^
specification: 0.2 to 0.5 volts
If the specification is still NOT obtained replace air distributor.
-
pull slide 2 of adjusting device into the 2nd detent (Full throttle position)
^
specification: 4.0 to 4.5 volts
If specification NOT obtained:
-
repeat test in idle position and/or repeat basic adjustment of potentiometer
If specification OK
-
push slide 2 of adjusting device down completely (rest position of sensor plate)
^
specification: 0.0 volts
If specification NOT obtained:
-
repeat lest in idle and full throttle positions
If specifications still NOT obtained after repeated adjustments
-
replace air distributor
If specifications OK
-
seal mounting screws with paint