5000,S (Calif.) L5-2144cc 2.14L SOHC (WE) (1982)
-
Lightly sand rotor in a clockwise direction using the leading edge of sanding disc.
-
To achieve a cross hatch pattern, continue sanding in a clockwise direction using the trailing edge of sanding disc.
Brake pads, cleaning
-
Deglaze and clean face of brake pads with sand paper as necessary
-
Slightly chamfer (bevel) edges of brake pads with a file.
NOTE:
Some front/rear brake pads were supplied with an adhesive (sticky) backing which helps adhere brake pad to the brake caliper housing and/or brake
carrier.
If vehicle is equipped with this type of pad, remove this (sticky) backing and residual adhesive from brake pad and brake caliper housing and/or
brake carder.