80 Quattro L5-2309cc 2.3L SOHC (NG) (1988)
![background image](/audi/80_quattro/l5-2309cc_2.3l_sohc_(ng)/Page-3595002.png)
Adjust trim panel to same height as outer window slot molding 2
^ mount door trim panel into position
^ check dimension:
a = 21.0 mm (13/16 in)
^ adjust door trim panel, if necessary, with screw 1 to achieve dimension a
Fig. 3 - Connecting piece, front
^ Glued to door shell Connecting piece 1 Door panel 2
Fig. 4 - Connecting piece, rear
Connecting piece 1
Door panel 2
Fig. 5 - Armrest control unit, removing/installing
Removing
^ remove Phillips screw 1 and take off lower armrest
^ remove Phillips screws 2 along bottom of control unit