80 Quattro L5-2309cc 2.3L SOHC (NG) (1988)
Fit part c of mounting sleeve onto steering rack seal
Press steering rack seal d fully down with part c of mounting sleeve
Remove parts c and b of mounting sleeve
Clean end of steering rack thoroughly before pushing on the seal (use a polishing cloth)
Moisten steering rack with hydraulic oil
Only apply pressure to mounting sleeve
The excess length of the mounting sleeve
(a) in relation to the steering rack rack seal
(d) must be visible (arrow)
Grease steering rack seal lightly on the outside with multi-purpose grease
Use mounting sleeve a to push steering rack seal onto steering rack
Remove mounting sleeve a
Push steering rack seal onto steering gear housing