90 L5-2309cc 2.3L SOHC (NG) (1988)
Expansion Block/Orifice Tube: Service and Repair
A/C Refrigerant Restrictor
REMOVAL
-
Discharge refrigerant system.
-
Remove A/C refrigerant line connection to evaporator.
-
Pull restrictor from evaporator with needle nose pliers.
INSTALLATION
-
Install restrictor with new O-ring.
-
Install A/C refrigerant line connection to evaporator.
A/C Refrigerant Lines To Evaporator
-
Be sure there is no tension on refrigerant lines before tightening.
-
Torque refrigerant lines to 16 Nm (12.0 ft lb).
-
Recharge refrigerant system.