90 L5-2309cc 2.3L SOHC (NG) (1988)
/Page-1848002.png)
11.
If voltage values are not within specification, replace the Hall generator.
12.
If voltage values are OK, check wiring between distributor harness plug and the ignition control unit harness plug.
Dist. pin 1 ................................................................................................................................................................................ Control unit pin 10
Dist. pin 2 ................................................................................................................................................................................ Control unit pin 24
Dist. pin 3 .................................................................................................................................................................................. Control unit pin 4
13.
If wiring, and Hall generator are OK, replace the ignition control unit.
