90 L5-2309cc 2.3L SOHC (NG) (1988)
Subframe: All Technical Service Bulletins
Front End - Clunking Noises
Subject:
Clunking noise from front end
Model(s): 80/90 from 1988 Model Year
Group:
40
Number:
90-04
Date:
September 30, 1990
Cause:
Insufficient torque of subframe and control arm bolts.
Production change:
Upgraded torquing procedure.
As of:
September 1988
VIN:
89 KA054524
Service Solution:
Replace bolts/washers and torque to specification. Hole in subframe must be free of wax.
^
see procedure on next page to install the following parts:
Part No.
Description
N 904 532 01
Subframe bolt
823 199 347
Subframe washer
N 903 276 01
Control arm bolt
N 011 527 8
Control arm washer
N 011 185 6
Control arm nut
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest information.
CAUTION
Always replace all bolts, washers and self-locking nuts that secure suspension components, e.g. subframe, control arms, stabilizer bar, ball joints, etc.,
when repairing these components.
Note