90 Quattro 20V (Canada) L5-2309cc 2.3L DOHC (7A) (1989)
/l5-2309cc_2.3l_dohc_(7a)/Page-5058002.png)
If gauge does not read accurately,
-
adjust fuel gauge. See: Adjustments
Audi Coupe Quattro 20 V
-
remove luggage compartment trim
-
remove fuel tank cover
-
remove connector from fuel gauge sender
-
connect VW 1301 to fuel gauge sender terminals 2 and 3
CAUTION! Be sure that connector terminals are not pushed back into sleeve during teat or when reconnecting to fuel gauge sender.
-
switch ignition ON
-
adjust VW 1301 according to following:
-
wait at least two minutes before reading gauge
-
gauge must read to right edge of third red line in reserve area (arrow)
-
tap instrument cluster glass lightly with finger while reading gauge to assure needle movement is complete
If gauge does not read accurately,
-
adjust fuel gauge. See: Adjustments
