90CS Quattro V6-2.8L (AAH) (1994)
Water Pump: Service and Repair
LEGEND
1
Thermostat
2
Seal
3
Thermostat Housing
4
Bolt
5
Gasket
6
Water Pump
7
Bolt
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Seal (2)
-
Always replace.
Bolt (4)
-
Tighten to: 10 Nm (7 ft. lbs.).
Gasket (5)
-
Always replace.
Bolt (7)
-
Tighten to: 10 Nm (7 ft. lbs.).
Water Pump (6)
-
Replacement requires removal of accessory drive belt and timing belt. Please see appropriate sections for these procedures.