90CS Quattro V6-2.8L (AAH) (1994)
Fig. 4 Pressing in wheel bearing
Larger inner diameter of wheel bearing faces wheel hub.
- Press in wheel bearing -A- up to stop.
Note: Use commercial separation tool, e.g. Kukko 15-17.
- Attach separation tool in groove of bearing inner race.
- Tighten with spindle.
Fig. 6 Pressing bearing inner race from hub
Fig. 7 Installing assembly device
- Position support 3292/1 on bonded rubber bushing.
- Slide tool 3292 over support 3292/1 and into position.
- Tighten threaded spindle as far as possible.