90S Quattro (Canada) V6-2.8L (AAH) (1993)
/v6-2.8l_(aah)/Page-1409001.png)
Alignment: By Symptom
Alignment - Specifications for Pulling/Drifting
Group: 44
Number: 92-04
Date: 10/15/92
Subject:
Pulling/Drifting
Model(s):
90 All
1993 m.y.
Check/inspect for condition(s) described in this Bulletin when performing the initial Delivery Inspection. When necessary perform corrective action(s) as
outlined Prior to delivery to the customer.
Condition:
Vehicle tends to pull to one side. Driver must compensate by correcting steering wheel position.
Service:
Check and correct wheel alignment front and rear.
Notes for wheel alignment Use optical alignment equipment to check wheel alignment.
When to check wheel alignment
^
after at least 1000-2000 km (600-1200 miles), once coil springs have settled.
Checking requirements
^
alignment equipment properly calibrated.
^
vehicle at curb weight (fuel tank full, spare tire and jack in place).
^
tire pressure at specification (see sticker on car)
^
vehicle correctly positioned and suspension bounced several times.
^
no excessive play or damage to steering, steering linkage or suspension.
Wheel alignment specifications
Quattro
