audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing gas strut > < Exploded view - rear lid

A1

Adjusting rear lid
Adjusting rear lid
Special tools and workshop equipment required
   
t  Setting gauge -3371-
  W00-0190
Gap widths
t  In area -A- = 4.5 mm ± 0.5 mm
t  In area -B- = 4 mm ± 0.5 mm
t  In area -C- = 2.3 mm all around
t  In area -D- = 5.0 mm ± 0.5 mm
t  In area -E- = 5.5 mm ± 0.5 mm

   
–  Height of rear lid at rear end can be adjusted by moving striker plate -1-.
–  Loosen nut -2-, move striker plate as appropriate and tighten nuts to specified torque → Item.
  A55-10297

Removing and installing gas strut > < Exploded view - rear lid