audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing mounting bracket > < Removing and installing contact sensor for front left exterior door handleG605

A1

Removing and installing lock cylinder guide
Removing and installing lock cylinder guide
Removing
–  Remove lock cylinder → Chapter.
–  Remove door trim → Rep. gr.70.
–  Remove cover for inner door panel → Chapter.
   
–  Unscrew bolt -3- from inner door panel.
–  Disengage guide -2- for lock cylinder at door lock -1-.
–  Remove lock cylinder guide.
Installing
Installation is carried out in the reverse order; note the following:
–  Install cover for inner door panel → Chapter.
–  Install door trim → Rep. gr.70.
–  Install lock cylinder → Chapter.
  A57-10600

Removing and installing mounting bracket > < Removing and installing contact sensor for front left exterior door handleG605