audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing contact sensor for front left exterior door handleG605 > < Removing and installing exterior door handle

A1

Removing and installing trim for exterior door handle
Removing and installing trim for exterior door handle
On vehicles without keyless entry system trim is fitted instead of the contact sensor for exterior door handle.
   
Removing
–  Remove exterior door handle → Chapter.
–  Prise out trim -2- for exterior door handle using an awl -1- at point indicated in illustration -arrow-.
–  Pull trim for exterior door handle out of exterior door handle -3-.
Installing
Installation is carried out in the reverse order; note the following:
–  Push in trim for exterior door handle until it engages audibly.
–  Install exterior door handle → Chapter.
–  Install lock cylinder → Chapter.
  A57-10317

Removing and installing contact sensor for front left exterior door handleG605 > < Removing and installing exterior door handle