A1
Removing and installing window guide |
1 - | Window guide |
q | Removing: |
– | Door window and triangular trim panel removed |
– | Unclip window guide (front) -arrow- from door. |
– | Starting at the top, detach window guide from door, also detaching it at A-pillar and B-pillar sides. |
– | Lift window guide out of door. |
q | Installing: |
– | To facilitate assembly, spray window guide with a soap solution. |
– | Position window guide at B-pillar and at the same time clip moulded section into inner door panel. |
– | Press window guide onto window frame, gradually working towards front. |
– | Position window guide at A-pillar and slide web profile into guide moulding. |
– | Clip window guide into door at front -arrow-. |
2 - | Door |
3 - | Window guide |
4 - | Triangular trim panel |
q | Removed |
Removing triangular trim panel |
1 - | Triangular trim panel |
q | Removing: |
– | Remove cover in area of triangular trim panel from the inside → Rep. gr.70. |
– | Unscrew bolt -5- and pull triangular trim panel with retaining clip -2- off door. |
– |
q | Installing: |
– | To install, first fit retaining clip on triangular trim panel and engage. |
– | Insert triangular trim panel into triangular section of door and secure it from the inside with bolt. |
2 - | Retaining clip |
3 - | Door |
4 - | Seal |
q | Insert in triangular section of door in correct position |
5 - | Bolt |
q | 2.5 Nm |