Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing tank filler flap locking motorV 155 >
< Overview - central locking system
A1
Body
General body repairs, exterior
Front door, central locking
Servicing central locking system
Removing and installing interface control unit for vehicle location systemJ843
Removing and installing interface control unit for vehicle location systemJ843
Removing and installing interface control unit for vehicle location system -J843-
Removing
–
With ignition switched off, disconnect earth wire at battery
→ Electrical system; Rep. gr.27
.
–
Remove luggage compartment side trim (left-side)
→ Rep. gr.70
.
–
Unplug all connectors at interface control unit for vehicle location system -J843-
-2-
.
–
Unscrew nuts
-arrows-
and take control unit out of vehicle.
–
–
–
Installing
Installation is carried out in the reverse order; note the following:
–
Install retaining frame for control units
→ Electrical system; Rep. gr.97
.
–
Connect battery. For measures required refer to
→ Electrical system; Rep. gr.27
.
Body
General body repairs, exterior
Front door, central locking
Servicing central locking system
Removing and installing interface control unit for vehicle location systemJ843
Removing and installing tank filler flap locking motorV 155 >
< Overview - central locking system