audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Re-sealing windows > < Window repair using windscreen repair kitVAS 6092 and resin, TalonVAS 1993/2

A1

Minimum drying times
Minimum drying times
  WARNING
t  For safety reasons, only use non-conductive 2-component adhesive with the designations listed below when installing windscreen and rear window.
t  You must NOT drive the vehicle until the minimum drying time has elapsed, as the vehicle is otherwise not safe to drive.
   
WindowVehicleAdhesive sealantMinimum drying time (in hours)
WindscreenWith airbagDA 004 600 A23
Rear window DA 004 600 A23
Side windows DH 009 100 033

Cleaning off adhesive sealant
We recommend using adhesive remover D 002 000 10 for cleaning. Always follow the safety instructions.
  WARNING
When cleaning from inside the vehicle passenger compartment, make sure you do not exert outward pressure on the window you have just fitted.
Painted surfaces
–  First clean painted surface with a dry cloth. Then clean off any residual dirt using adhesive remover D 002 000 10.
Plastic trim panel
–  Allow adhesive sealant to dry (approx. 1 hour) and then pull off.
   

Re-sealing windows > < Window repair using windscreen repair kitVAS 6092 and resin, TalonVAS 1993/2