Checking automatic belt retractor (locking action) |
The automatic belt retractor has two locking functions. |
t
| The first locking function is triggered by pulling the belt quickly out of the automatic belt retractor (accelerated belt unwinding). |
–
| Tug the webbing firmly to pull it out of the automatic belt retractor. |
l
| No locking effect - replace seat belt complete with buckle. |
l
| In the event of problems when pulling out or retracting the belt, start by checking whether the automatic belt retractor has changed position. |
l
| The second locking function is triggered by altering vehicle motion (vehicle-dependent locking function). |
WARNING For safety reasons, the test drive should be performed on a road with no traffic so as not to endanger other road users. |
|
–
| Accelerate the vehicle to 20 km/h and then press the foot brake to implement emergency braking. |
l
| If the belt is not locked by the locking mechanism on braking, replace the seat belt complete with the buckle. |
|
|
|