audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear belt end fitting > < Exploded view of rear three-point seat belt

A1

Removing and installing rear three-point seat belt
Removing and installing rear three-point seat belt
Removing
–  Remove the luggage compartment side trim → Chapter.
–  Remove the side trim → Chapter.
–  Remove the C-pillar trim → Chapter.
–  Remove the rear belt end fitting → Chapter.
–  Guide the webbing out of the C-pillar trim.
   
–  Screw out the bolt -1-.
–  Take the automatic belt retractor -2- out of the mount.
  A69-10672
Installing
–  Insert the automatic belt retractor with the locating element -1- in the mount -2--arrow- and tighten the bolt.
Perform further installation operations in the reverse order of removal.
Notes on installation: For example tightening torques, component replacement → Chapter.
  A69-0430

Removing and installing rear belt end fitting > < Exploded view of rear three-point seat belt