A1
Exploded view of backrest cover panel |
1 - | Head restraint guide |
q | With release button |
q | Always fitted on the left side of the backrest |
q | Removing and installing → Chapter |
q | Guide lug must engage in recess of mount at backrest frame |
q | Retainer tab must engage with backrest frame |
2 - | Head restraint guide |
q | Without release button |
q | Always fitted on the right side of the backrest |
q | Removing and installing → Chapter |
q | Guide lug must engage in recess of mount at backrest frame |
q | Retainer tab must engage with backrest frame |
3 - | Holder |
q | For backrest cover panel |
q | Removing and installing → Chapter |
4 - | Retaining clip |
q | Insert in backrest cover panel |
q | Remove any retaining clips left in holder mounting points and insert in backrest cover panel for installation |
q | Replace damaged or misshapen retaining clips |
5 - | Backrest cover panel |
q | Removing and installing → Chapter |
q | Press on until heard to engage |
6 - | Retaining clip |
q | 6x |
q | Insert in upper trim section |
q | Replace damaged or misshapen retaining clips |
7 - | Upper trim section |
q | For backrest release mechanism |
q | Removing and installing → Chapter |
q | Position at backrest cover panel and press on until heard to engage |
8 - | Backrest release handle |
q | Can be replaced with front seat in position |
q | Removing and installing → Chapter |
q | Slide on and press home the handle |
9 - | Clip |
q | 10x |
q | Insert in backrest cover panel |
10 - | Lower trim section |
q | For backrest release mechanism |
q | Removing and installing → Chapter |
q | Installation position: »TOP arrow mark« facing upwards |
q | Position at backrest frame and press on until heard to engage |
11 - | Bolt |
q | 4x |
q | 3.2 Nm |
12 - | Retaining clip |
q | For backrest release handle |
q | Replace |
13 - | Backrest frame |