–
| Sever the wire -1- right at the old heating element -3-. |
Note Leave the old heating element attached to the backrest padding -2- and affix the new heating element over it. |
–
| Align the new heating element on the backrest padding. |
–
| Detach the backing from the heating element, taking care not to damage the heating element. |
–
| Bond on the heating element exactly over the old heating element without any creases. |
Perform further installation operations in the reverse order of removal. |
Notes on installation: For example tightening torques, component replacement → Chapter. |
|
|
|