–
| Remove the rear cross panel trim → Chapter. |
–
| Remove the mount for the luggage compartment floor covering → Chapter. |
–
| Screw out the bolt -2-. |
–
| Detach the rear lid seal -4- in the area of the luggage compartment side trim. |
–
| Prise the luggage compartment side trim -5- off the body using the removal lever -80 - 200--arrows-. |
–
| Carefully detach the luggage compartment side trim from the side trim and from the C-pillar trim. |
–
| Disengage the luggage compartment side trim at the eyelets -1, 3- and detach. |
Install in reverse order, paying attention to the following: |
–
| Fold the rear lid seal over the luggage compartment side trim. |
Notes on installation: For example tightening torques, component replacement → Chapter. |
|
|
|