WARNING | Heed the safety regulations for pyrotechnic components → Chapter. |
|
| –
| Remove the front belt end fitting → Chapter. |
| –
| Screw out the bolts -2, 3-. |
| –
| Detach the B-pillar trim -1- from the B-pillar. |
| –
| Pull the B-pillar trim out of the mount at the body -arrow-. To do so, swivel the trim inwards and at the same time detach it downwards. |
| –
| Guide out the webbing with latch plate and detach the B-pillar trim. |
| Install in reverse order, paying attention to the following: |
WARNING | t
| Heed the safety regulations for pyrotechnic components → Chapter. |
| t
| Take care not to trap the curtain airbag when fitting the B-pillar trim. |
|
| –
| Guide in the webbing with latch plate. |
| –
| Insert the B-pillar trim upwards into the mount at the roof. |
| –
| Fold the lip of the door seal over the trim. |
| Notes on installation: For example tightening torques, component replacement → Chapter. |
|
|
|
