audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Exploded view of side trim > < Exploded view of C-pillar trim
Removing and installing C-pillar trim
Removing and installing C-pillar trim
Special tools and workshop equipment required
   
t  Removal lever -80 - 200-
  W00-0353
Removing
  WARNING
Heed the safety regulations for pyrotechnic components → Chapter.
–  Remove the luggage compartment side trim → Chapter.
–  Remove the side trim → Chapter.
–  Remove the rear belt end fitting → Chapter.
–  Unclip the C-pillar trim -Item 1- with the removal lever -80 - 200--arrows- and pull out downwards.
–  Guide out the webbing with latch plate and detach the C-pillar trim.
Installing
  WARNING
t  Heed the safety regulations for pyrotechnic components → Chapter.
t  Take care not to trap the curtain airbag when fitting the C-pillar trim.
Install in reverse order, paying attention to the following:
–  Fold the lip of the rear lid seal over the trim.
Notes on installation: For example tightening torques, component replacement → Chapter.
  A70-11452

Exploded view of side trim > < Exploded view of C-pillar trim