audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing moulded headliner > < Exploded view of moulded headliner

A1

Removing and installing roof grab handle
Removing and installing roof grab handle
Special tools and workshop equipment required
t  Offset screwdriver
   
Removing
  Caution
Only unclip the expanding caps -1- and -3- as far as the detent position. Do not pull out completely, as otherwise the silicone brake and the spring could drop out and the roof grab handle would then have to be replaced.
–  Use an offset screwdriver -2- to unclip the expanding caps -1, 3- as far as the detent position.
–  Take the roof grab handle -4- out of the body opening.
Installing
Install in reverse order.
Notes on installation: For example tightening torques, component replacement → Chapter.
  A70-10832

Removing and installing moulded headliner > < Exploded view of moulded headliner