Workshop Manuals Factory service & repair Audi
01 Running gear02 Body03 Power unit04 Power transmission05 Vehicle electrics06 Heating, ventilation, air conditioning system
Audi A101 · Running gear
01 · Steering & suspension

Bleeding brake system

Make
Audi
Model
A1
Section
Brake system › Brakes, hydraulics, regulator, servo › Bleeding brake system
Running gearBleeding brake system
Bleeding brake system
  WARNING
t  Do not under any circumstances allow brake fluid to come into contact with fluids that contain mineral oils (e.g. oil, petrol, cleaning agents). Mineral oils damage the plugs and seals in the brake system.
t  Brake fluid is poisonous and must NOT be drawn off by sucking through a hose. On account of its corrosive effect it must also not be allowed to come into contact with paintwork.
t  Brake fluid is hygroscopic, i.e. it absorbs moisture from the surrounding air, and should therefore always be stored in airtight containers.
t  Brake fluid that has been extracted from the system must not be re-used.
t  Always observe the relevant environmental regulations for disposal.
  Note
t  Use only new brake fluid.
t  Rinse off brake fluid spillages using plenty of water.
   

Parts & tools for this job For Audi A1

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.