A1
Exploded view of air distribution housing, evaporator and intake housing |
1 - | Bolt |
q | 4x |
q | 1.5 Nm |
2 - | Bolt |
q | 2x |
q | 1.5 Nm |
3 - | Bottom section of air duct housing |
q | Different versions → Electronic parts catalogue |
q | Removing and installing → Chapter |
4 - | Condensation drain hose |
q | Checking → Chapter |
q | Removing and installing → Chapter |
5 - | Evaporator |
q | Removing and installing → Chapter |
6 - | Seal/insulation |
q | Heat insulation for expansion valve |
7 - | Top section of air duct housing |
q | Different versions → Electronic parts catalogue |
q | Removing and installing → Chapter |
8 - | Bolt |
q | 2x |
q | 1.5 Nm |
9 - | Foam spacer |
q | For refrigerant lines |
q | For seal/insulation |
10 - | Bolt |
q | 1.5 Nm |
11 - | Foam seal |
q | Replace if damaged |
12 - | Intake housing |
q | With fresh-air and air recirculation flap |
q | Different versions → Electronic parts catalogue |
q | Removing and installing → Chapter |
13 - | Clip |
q | 2x |
14 - | Clip |
q | 8x |
15 - | Air distribution housing |
q | Do not dismantle |
q | Different versions → Electronic parts catalogue |
q | Removing and installing → Chapter |
|