audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing mounting bracket with clutch master cylinder > < Exploded view - pedal cluster, clutch master cylinder

A1

Removing and installing clutch position senderG476
Removing and installing clutch position sender -G476-
   
Removing
–  Remove air cleaner housing → Injection and glow plug system; Rep. gr.23.
  A23-10643
–  Unclip clutch position sender -G476--arrows A, B-.
–  Unplug electrical connector and remove clutch position sender -G476-.
  Note
-Items 1, 2, and 3- can be disregarded.
Installing
Installation is carried out in reverse sequence; note the following:
–  Fit clutch position sender -G476- all the way onto clutch master cylinder (electrical connector should be plugged in beforehand).
l  Clutch position sender should click into place -arrow A-.
–  Check by pulling clutch position sender-arrow B-.
–  Install air cleaner housing → Injection and glow plug system; Rep. gr.23.
  N30-10231

Removing and installing mounting bracket with clutch master cylinder > < Exploded view - pedal cluster, clutch master cylinder