audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fanV7 > < Radiator fan - exploded view

A1

Removing and installing radiator cowl
Removing and installing radiator cowl
   
Removing
–  Unclip air duct at lock carrier -arrows-.
  A24-10884
–  Unscrew bolts -arrows- from lock carrier and detach air duct.
  A10-11402
–  Remove noise insulation -1- → Rep. gr.66.
  A10-11306
  WARNING
Risk of injury as the radiator fans may start up automatically.
Unplug electrical connectors before performing work on radiator cowl.
–  Unplug electrical connector -1- for radiator fan at bottom of radiator cowl.
–  Press locking tabs on left and right sides of radiator cowl -arrow- and at the same time lift radiator cowl off radiator.
Installing
Installation is carried out in the reverse order; note the following:
–  Install noise insulation → Rep. gr.66.
  A19-11105

Removing and installing radiator fanV7 > < Radiator fan - exploded view