A1
| Assembly mountings - exploded view |
| 1 - | Bolt |
| q | Gearbox mounting to body |
| q | Tightening torque → Rep. gr.34 |
| 2 - | Bolt |
| q | Renew |
| q | 20 Nm + 90° further |
| 3 - | Engine mounting |
| q | Removing and installing → Chapter |
| 4 - | Support arm |
| 5 - | Nut |
| q | Do not loosen unless renewing engine mounting -item 3- |
| q | Renew |
| q | 40 Nm + 90° further |
| 6 - | Threaded pin |
| q | Renew |
| q | 30 Nm + 90° further |
| 7 - | Bolt |
| q | Renew |
| q | 30 Nm + 90° further |
| 8 - | Pendulum support |
| 9 - | Bolt |
| q | Pendulum support to subframe |
| q | Tightening torque → Rep. gr.34 |
| 10 - | Bolt |
| q | Pendulum support to gearbox |
| q | Tightening torque → Rep. gr.34 |
| 11 - | Bolt |
| q | Gearbox mounting to gearbox support |
| q | Tightening torque → Rep. gr.34 |
| 12 - | Bolt |
| q | Gearbox mounting to body |
| q | Tightening torque → Rep. gr.34 |
| 13 - | Gearbox mounting |
| 14 - | Gearbox support |
| 15 - | Bolt |
| q | Gearbox support to gearbox |
| q | Tightening torque → Rep. gr.34 |
| 16 - | Bolt |
| q | Gearbox support to gearbox |
| q | Tightening torque → Rep. gr.34 |
