audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking oil pressure switchF1 and oil pressure > < Removing and installing engine oil cooler

A1

Removing and installing oil pressure switchF1
Removing and installing oil pressure switch -F1-
   
Removing
–  Release fasteners -arrows- and detach air duct -1-.
  A24-10841
–  Unplug electrical connector -arrow-.
–  Unscrew oil pressure switch -F1-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Fig. „„Oil pressure switch -F1- - tightening torque““
  Note
t  Renew seal.
t  Fit the new oil pressure switch -F1- into the connection immediately to avoid loss of oil.
–  Check oil level → Booklet819.
  A17-10341

Checking oil pressure switchF1 and oil pressure > < Removing and installing engine oil cooler