A1
Turbocharger - exploded view |
Part 1 |
1 - | Bolt |
q | 8 Nm |
2 - | Oil return line |
3 - | Bolt |
q | 8 Nm |
4 - | Gasket |
q | Renew |
5 - | Coolant supply line |
6 - | Bolt |
q | 11 Nm |
7 - | O-rings |
q | Renew |
8 - | Coolant return hose/pipe |
9 - | Bolt |
q | 8 Nm |
10 - | Banjo bolt |
q | 20 Nm |
11 - | Seals |
q | Renew |
12 - | Bolt |
q | 8 Nm |
13 - | Oil supply line |
14 - | Bolt |
q | 8 Nm |
15 - | O-ring |
q | Renew |
16 - | Turbocharger |
q | Combined with exhaust manifold |
q | Removing and installing → Chapter |
17 - | O-ring |
q | Renew |
18 - | O-ring |
q | Renew |
19 - | Bolt |
q | 11 Nm |
20 - | Turbocharger air recirculation valve -N249- |
21 - | O-ring |
q | Renew |
22 - | Intake connecting pipe |
23 - | Bolt |
q | With sleeve |
q | 10 Nm |
24 - | Retaining clip |
q | Renew |
25 - | Bolt |
q | 20 Nm |
26 - | Vacuum unit for turbocharger |
q | Checking → Chapter |
q | Removing and installing → Chapter |
q | Adjusting → Chapter |
27 - | Lock nut |
q | 10 Nm |
28 - | Operating lever |
29 - | Gasket |
q | Renew |
Part 2 |
1 - | Heat shield |
2 - | Nut |
q | Tightening torque and sequence → Fig. |
3 - | Bracket |
q | For heat shield |
4 - | Gasket |
q | For exhaust manifold |
q | Renew |
5 - | Bolt |
q | 23 Nm |
6 - | Heat shield |
7 - | Bolt |
q | 10 Nm |
8 - | Bracket |
9 - | Bolt |
q | 10 Nm |
10 - | Turbocharger |
q | Combined with exhaust manifold |
q | Removing and installing → Chapter |
11 - | Clip |
q | 3x |
Note
|
Stage | Nuts | Tightening torque |
1. | -1 … 9- | Screw in nuts by hand until they make contact |
2. | -1 … 9- | 16 Nm |