audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Working on vehicles with start/stop system > < Procedure before opening high-pressure section of injection system

A1

Working on the cooling system
Working on the cooling system
When working on the cooling system note the following warnings:
  WARNING
Hot steam/hot coolant can escape - risk of scalding.
t  The cooling system is under pressure when the engine is hot.
t  To allow pressure to dissipate, cover filler cap on coolant expansion tank with cloth and open carefully.
Risk of injury as the radiator fans may start up automatically.
Unplug electrical connectors before starting to work in the area of radiator cowl.
  Caution
Overheating can occur if the filler cap is not fitted properly.
The filler cap must engage positively and audibly when it is closed.
   

Working on vehicles with start/stop system > < Procedure before opening high-pressure section of injection system