audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator and charge air cooler > < Radiator - exploded view

A1

Removing and installing radiator cowl
Removing and installing radiator cowl
Special tools and workshop equipment required
   
t  Assembly tool -T10118-
  W00-1148
Removing
–  Release fasteners -arrows- and detach air duct -1-.
  A23-10553
–  Remove bolts -arrows- and detach air duct -1-.
  A24-10844
–  Unplug electrical connector -2- at throttle valve module -J338--arrow-.
  Note
Disregard -items 1, 3, 4-.
  N15-10502
  WARNING
Risk of injury as the radiator fans may start up automatically.
Unplug electrical connectors before performing work on radiator cowl.
–  Unplug electrical connector -1- for radiator fan at bottom of radiator cowl.
–  Press locking tabs on left and right sides of radiator cowl -arrow- and at the same time lift radiator cowl off radiator.
Installing
Installation is carried out in the reverse order; note the following:
–  Install air duct → Rep. gr.24.
  A19-11105

Removing and installing radiator and charge air cooler > < Radiator - exploded view