–
| Adjust inner section of oil seal extractor -3203- so it is flush with the outer section and lock in position with knurled screw. |
–
| Lubricate threaded head of oil seal extractor, place it in position and screw it into oil seal as far as possible (applying firm pressure). |
–
| Loosen knurled screw and turn inner part against crankshaft until the oil seal is pulled out. |
–
| Clamp flats of oil seal extractor in vice and use pliers to remove oil seal. |
–
| Clean contact surface and sealing surface for oil seal. |
–
| Remove oil residue from crankshaft journal with a clean cloth. |
Note t
| Renew the bolts tightened with specified tightening angle. |
t
| Do not lubricate sealing lip and outer rim of oil seal before pressing in. |
|
|
|