A1
Intake manifold (part 1) - exploded view |
1 - | Connecting hose |
q | To air cleaner |
2 - | Electrical connector |
q | For intake manifold pressure sender -G71- |
3 - | Electrical connector |
q | Solenoid for coolant circuit -N492- |
4 - | Bolt |
q | 10 Nm |
5 - | Non-return valve |
q | For crankcase breather |
6 - | Connecting hose |
q | To turbocharger |
7 - | O-rings |
q | Renew |
8 - | Intake manifold |
q | Removing and installing → Chapter |
9 - | Connecting hose |
q | To coolant pump |
Note
For engines with a coolant pump that can be switched off |
10 - | Solenoid for coolant circuit -N492- |
Note
For engines with a coolant pump that can be switched off |
11 - | Connection |
q | For fuel supply |
12 - | Spring-type clip |
q | Remove and install using hose clip pliers -VAS 6340- |
13 - | Fuel supply hose |
q | To high-pressure pump |
14 - | Activated charcoal filter solenoid valve 1 -N80- |
15 - | Connecting hose |
q | To activated charcoal filter |
16 - | Connecting hose |
17 - | Electrical connector |
q | For throttle valve module -J338- |
18 - | Connecting hose |
19 - | Connector |
q | For charge pressure sender -G31- with intake air temperature sender 2 -G299- |