audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Power transmission > < Removing and installing Hall senderG40

A1

Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
   
t  Socket, 4 mm -T10370-
Removing
–  Remove intake manifold → Chapter.
  W00-10582
–  Remove supercharger → Rep. gr.21.
–  Unplug electrical connector for engine speed sender -G28--item 3-.
–  Unscrew bolt -2- and detach engine speed sender.
  Note
  A28-10005
If access is difficult, use socket (4 mm) -T10370-.
Installing
Installation is carried out in the reverse order; note the following:
–  Lubricate O-ring with clean engine oil.
–  Carefully insert engine speed sender -G28- into guide (do not knock in).
–  Install supercharger → Rep. gr.21.
–  Install intake manifold → Chapter.
  W00-10582

Power transmission > < Removing and installing Hall senderG40