Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
TDI injection and glow plug system (4-cyl. 2.0 ltr. 4-valve common rail) >
< Removing and installing Hall senderG40
A1
Power unit
Direct petrol injection and ignition system (4-cyl. 1.4 ltr. 4-valve turbo with timing chain)
Ignition system, glow plug system
Servicing ignition system
Removing and installing engine speed senderG28
Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
t
Socket, 4 mm -T10370-
Removing
–
Remove intake manifold
→ Chapter
.
–
Unplug electrical connector for engine speed sender -G28-
-item 3-
.
–
Unscrew bolt
-2-
and detach engine speed sender.
Note
If access is difficult, use socket (4 mm) -T10370-.
Installing
Installation is carried out in the reverse order; note the following:
–
Lubricate O-ring with clean engine oil.
–
Carefully insert engine speed sender -G28- into guide (do not knock in).
–
Install intake manifold
→ Chapter
.
Power unit
Direct petrol injection and ignition system (4-cyl. 1.4 ltr. 4-valve turbo with timing chain)
Ignition system, glow plug system
Servicing ignition system
Removing and installing engine speed senderG28
TDI injection and glow plug system (4-cyl. 2.0 ltr. 4-valve common rail) >
< Removing and installing Hall senderG40