audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Fuel supply system, petrol engines > < Accelerator pedal module - exploded view

A1

Removing and installing accelerator pedal module with accelerator position sender G79/G185
Removing and installing accelerator pedal module with accelerator position sender -G79-/-G185-
   
Removing
–  Remove dash panel trim (bottom) on driver's side → Rep. gr.68.
–  Press release tab and unplug electrical connector -2-.
–  Unscrew bolts -1 and 3- and detach accelerator pedal module.
Installing
l  Tightening torque → Chapter „Accelerator pedal module - exploded view“
Installation is carried out in the reverse order; note the following:
–  Install dash panel trim (bottom) on driver's side → Rep. gr.68.
  A20-0712

Fuel supply system, petrol engines > < Accelerator pedal module - exploded view