A1
Fuel delivery unit - exploded view |
1 - | Fuel delivery unit |
q | With fuel system pressurisation pump -G6- |
q | Checking fuel pump (electrical test) in Guided Fault Finding → Vehicle diagnostic tester |
q | Removing and installing → Chapter |
q | Put at least 5 litres of fuel into tank after installing |
q | Checking residual pressure → Rep. gr.24 |
2 - | Seal |
q | Renew |
q | Install dry |
3 - | Union nut |
q | 80 Nm |
q | Remove and install with union nut tool -3217- |
4 - | Fuel return line |
q | From fuel filter |
q | Do not kink |
q | To disconnect from flange, press release tab on connection |
q | Note direction of arrow (fuel supply or fuel return system) on flange when installing |
q | Clipped onto fuel tank |
5 - | Fuel supply line |
q | To fuel filter |
q | Do not kink |
q | To disconnect from flange, press release tab on connection |
q | Note direction of arrow (fuel supply or fuel return system) on flange when installing |
q | Clipped onto fuel tank |
6 - | Electrical connector |
q | For fuel system pressurisation pump -G6- and fuel gauge sender -G- |
7 - | Fuel gauge sender -G- |
q | Clipped onto baffle housing |
q | Checking resistance values → Chapter |
q | Removing and installing → Chapter |