audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing intake manifold > < Intake manifold - exploded view

A1

Removing and installing throttle valve moduleJ338
Removing and installing throttle valve module -J338-
   
Removing
–  Pull off engine cover panel → Chapter.
–  Loosen hose clip -arrow-.
  A23-10577
–  Unplug electrical connector -2-.
–  Remove bolt -1- for dipstick guide tube.
–  Remove bolts -arrows- and detach throttle valve module -J338- from air hose.
Installing
Installation is carried out in the reverse order; note the following:
Tightening torques
l  → Chapter „Intake manifold - exploded view“.
l  → Rep. gr.17.
  Note
Fit new O-ring.
  A23-10448

Removing and installing intake manifold > < Intake manifold - exploded view