A1
| Exploded view - axle beam with attachments |
| 1 - | Axle beam |
| q | Keep contact surface and threaded holes for stub axle free from paint and dirt |
| q | Removing and installing → Chapter |
| 2 - | Spring plate |
| 3 - | Coil spring |
| q | Note colour code |
| q | Note different types of running gear. For correct version refer to → Electronic parts catalogue „ETKA“ |
| q | Surface of spring coil must not be damaged |
| q | Removing and installing → Chapter |
| 4 - | Spring seat |
| 5 - | Bolt |
| q | 30 Nm +90° |
| q | Always renew if removed |
| 6 - | Shock absorber |
| q | Removing and installing → Chapter |
| q | For correct version refer to → Electronic parts catalogue „ETKA“ |
| 7 - | Bolt |
| q | 40 Nm +90° |
| q | Tighten in unladen position → Chapter |
| q | Always renew if removed |
| 8 - | Nut |
| q | Always renew if removed |
| 9 - | Bolt |
| q | 8 Nm |
| 10 - | ABS speed sensor |
| q | Before inserting sensor, clean inner surface of bore and coat with lubricating paste |
| 11 - | Stone deflector |
| q | For correct version refer to → Electronic parts catalogue „ETKA“ |
| 12 - | Stub axle |
| q | Must not be straightened |
| q | Recutting the thread is not permitted |
| 13 - | Brake disc |
| 14 - | Bolt |
| q | 4 Nm |
| 15 - | Grease cap |
| q | Always renew if removed |
| q | Proper sealing can only be achieved by installing a new grease cap. This is essential for optimum function and service life of wheel bearing. |
| 16 - | Twelve-point nut |
| q | Tightening torque → Item |
| q | Always renew if removed |
| 17 - | Wheel hub with wheel bearing |
| q | Removing and installing → Chapter |
| q | The wheel bearing and wheel hub are combined in one housing |
| q | The wheel hub with wheel bearing unit is maintenance and adjustment-free. There is no provision for adjustment or repair. |
| 18 - | Bolt |
| q | 30 Nm +90° |
| q | Always renew if removed |
| 19 - | Splash plate |
| 20 - | Bolt |
| q | 45 Nm +90° |
| q | Insert from outside |
| q | Always renew if removed |
| q | Tighten in unladen position → Chapter |
| 21 - | Bonded rubber bush |
| q | Renewing → Chapter |
| 22 - | Nut |
| q | Always renew if removed |
